Chop stop
Clean fit and finish fits tight on rail. Nut set up needs a little work but awesome product! Recommend!
Can't find what you're looking for? - Check with our Dealers
Since its initial release in 2022, the Chopstop has established itself as an excellent choice for individuals seeking more than just a basic hand stop. Standout features such as integrated cable management functionality, direct M-LOK accessory interfacing, and optimized ergonomics rightfully earned its place as a formidable, well thought out competitor among industry offerings. Without a doubt, the Chopstop product line is our flagship product that really kickstarted our success and set the tone for our future products.
The Chopstop product line currently consists of 3 different offerings.
Chopstop Mod 1 - The original "winged" variant that eliminates overhanging edges on the handguard.
Chopstop Mod 2 - Traditional "flat mounting top". Universally compatible with all M-LOK systems including wider non-standard handguards that the Mod 1 is not compatible with.
Chopstop Mod 3 - Specifically adapted for picatinny rail systems.
The question we get most is "which is right for me?" The answer is simply, it depends.
If you have a picatinny rail, then the easy answer is to go with the Mod 3. For Mod 1 vs Mod 2, its all about personal preference assuming your current M-LOK handguard is compatible with the Mod 1. Individuals with larger hands tend to prefer the Mod 1 due to its increased surface area. Mounting a Mod 3 to an M-LOK picatinny section has been a popular choice for individuals with even larger hands or for those who just want a little bit more handstop coming off their rails.
The Chopstop Mod 1 follows Magpul's TDP for Type 2 M-LOK accessories. Handguard specifications for compatibility with the Mod 1 are as follows:
It is important to note that anything exceeding these specification will probably require modification to the handstop for proper fitment. Some examples wider non-standard handguards from Noveseke, Hodge, Aero Percision Enhanced Rails, SCAR/AK rails, the SIG M400 and MCX Virtus rails.
If you aren't sure if your handguard is compatible with the Mod 1 feel free to reach out and ask via email. If you don't want to wait for a response, feel free to order anyway knowing that we got you covered and will take care of you in the event you need to make an exchange.
Package contents include:
*T25 Torx wrench required for install
__________
The CHOPSTOP MOD 3 maintains the ergonomic design of its predecessor, featuring an 82° forward swept serrated face. The subtle proprietary texturing on the sides ensures a secure grip without being overly aggressive and a small concave thumb cutout with serrated texturing at the rear enhances ergonomics when working with barricades.
Designed specifically for MIL-STD-1913 rail systems, the MOD 3 employs a distinctive attachment technique, featuring a top-loading internal hex nut retention design, fastened securely with a single torx bolt.
Clean fit and finish fits tight on rail. Nut set up needs a little work but awesome product! Recommend!
I thought I had had a problem with my MOD3 that came in the mail so I reached out to him in regards to this problem and he got back to me very soon. What was happening was when you tighten down the screw, once it gets to a certain point the nut will rotate with the rotation of the screw once it's torqued to spec thus not allowing the screw to walk out under recoil. We ended up FaceTiming via Instagram and he showed me and was speaking to me how he went about designing this product and assured me that nothing was wrong and everything was okay. It's the fact that he reached back out to me and went the extra mile to demonstrate it and show me for myself that this is how the product was designed I thought was just super cool man. He's a cool guy and clearly shows great customer service so ?? thanks alot man!
Clean fit and finish fits tight on rail. Nut set up needs a little work but awesome product! Recommend!
I thought I had had a problem with my MOD3 that came in the mail so I reached out to him in regards to this problem and he got back to me very soon. What was happening was when you tighten down the screw, once it gets to a certain point the nut will rotate with the rotation of the screw once it's torqued to spec thus not allowing the screw to walk out under recoil. We ended up FaceTiming via Instagram and he showed me and was speaking to me how he went about designing this product and assured me that nothing was wrong and everything was okay. It's the fact that he reached back out to me and went the extra mile to demonstrate it and show me for myself that this is how the product was designed I thought was just super cool man. He's a cool guy and clearly shows great customer service so ?? thanks alot man!
I wanted to chop a BCM grip and then I came across the chop stop and itās my favorite grip ever.
Very amazing handstop, shouldāve switch from the broom handle sooner.
Overall fit and finish is great. Feels solid, super easy install, didnāt even have to hold the nut on the back side! Customer service is great, very kind people over here. Really sets the business apart from the big corps. 10/10 would recommend.
With limited options this was exactly what I needed for my LWRC.